spare Parts
We are offering parts of the highest quality
From us you get high-quality components of well-known manufacturers, as well as in-house productions of the highest quality and products that are manufactured according to our own high standards especially for us.
productions
Some of the parts developed and produced by ourself:
Tape Tension B77
New tape tension switch for all Revox B77 to query the set speed and the selected reel size. With the B77 MKII, both are always queried! Why not with the Revox B77 MKI?
Tape drive control B77
New tape drive control 1.177.318 for all Revox B77 tape machines with many optimizations, better and faster braking, less power consumption, galvanic isolation of the voltages, no electrolytic capacitors, etc.
Power supply for B750
New power supply board 1.178.137 for all Revox B750 integrated amplifiers based on today's technology and many optimizations for an improved power supply, a better sound and a cooler environment!
Dog pin
for all Revox Studer B77 and PR99.
The driver is located on the pressure arm and ensures that the tape is lifted off the heads or rests on the heads during record and play! The old plastic parts break apart more and more often. (Similar to picture)
Studer A807 Stands
for all Studer A807 tape machines. Feet for the Studer A807 are extremely rare. Hardly any Studer A807 was ordered with feet. Our feet are manufactured using the 3-D printing process, are extremely stable and fit perfectly with the Studer A807 tape machine. (Similar to picture)
Studer A67 Stands
for all Studer A67 or B67 and possibly other Studer devices. The plastic feet are spreading apart more and more due to their age. We at revox-online now offer the right replacement for the brittle feet of the Studer devices. (Similar illustration)
further Informations
Studer A101
Replacement circuit for Studer A 101 hybrid module!
further Informations
We have rarely seen so much nonsense about the various equivalent circuits of the Studer Linear Hybrid Module A101. Here is the better alternative in SMD technology, which comes very close to that of the original hybrid technology and is technically far superior!
Replacement TBA931
The original dual op amps in 14-pin housing are no longer synonymous.
We offer replacement in three audiophile versions
NE 5532, OPA 2134 and LME 47920.
Distance extension RCA
With this extension of the RCA connectors, you can use all high-quality cables of well-known manufacturers. Only the original revox-online extension has a 15 mm gap! What is the use of 13 mm distance and you are again severely limited?
Replacement relay for ITT
Since 2008 we have been making replacements for various relays for the maintenance of Revox devices. Our relays have a switching capacity of up to 2 amps - like the original relay.
We manufacture the replacement with 5V to 48V and can thus supply all relays of the series A26xx. All our relays are fully equipped with all contacts!
Replacement relay for NF x EB
Since 2008 we have been making replacements for various relays for the maintenance of Revox devices.
Our relays have a switching capacity of up to 2 amps - like the original relay.
We manufacture the replacement with 5V to 48V and can therefore supply all relays of the series NF 2 EB and NF 4 EB or AZ 2C and AZ 4C
Digital counter for Revox A700 and Studer A67
- 5-digit display
- LED technology
- Real-time display
- easy installation
- no soldering required
counter 700
You can choose at any time from 7 colors by selecting the filter films.
At each of the three speeds of the Revox A700, the appropriate played tape length is displayed in hours, minutes and seconds.
The counter readings are retained after switching off!
counter 77
In 2003, the first digital counter for all Revox A77, B77 and PR99 MKI was produced.
Real time counting and speed detection are not provided here. As with the analogue counter, only the speed of the right-hand winding motor is recorded here. The mounting is a bit more complicated than with the A700 and a total of two solder joints have to be made. Of course you will receive a detailed instruction manual!
All digital meters are supplied with 7 different colored filter foils. This gives you the choice to set the color on site or to change it at any time.
Assembled LEDs
Record display for all Revox B77 and PR99 tape machines. The LEDs match in brightness as well as in color to 100% of that of the original displays.
VU-Meter A700
For a long time there was no longer the VU meter of the Revox A700. Now that we have brought these VU meters in LED technology to market, VU meters are again produced with the original tool. Nevertheless, the demand of LED VU meters is so great that we are considering producing more VU meters!
products specially made for us
Specially made spare parts according to our own high standards
new butterfly heads
We can offer you brand new butterfly heads for all Revox tape machines. Thanks to the good cooperation with the photovox company, we have succeeded in offering you brand-new standard and butterfly tape heads for your tape recorders.
new brake bands
Brake bands from new production suitable for all Revox A77, B77, PR99, A700 and C270, C274 and C278 in top quality, individually packed in special packaging!
Of course from revox-online
toggle switch
The weak points of the toggle switches are the plastic levers. After there were no new switches, we started immediately with the production of this spare part.
toroidal transformer
We offer audiophile toroidal transformers for the amplifiers:
- Revox A740 / B740
- Revox B750
- Revox B250
- Revox B150
- Studer A68
Manufactured to EN61558
Clamping sleeve (trident)
New clamping sleeves or trident locks, are specially manufactured for us. We offer them in two diefferent sizes. They fit for every Revox and Studer Reel to Reel machine.
Pressure rollers for
Revox A77, B77, B710 ...
- Genuine rubber
- maintenance free
- Sintered bronze bearings
- round cut
- Made in Germany
Pinch roller Revox B77
For Revox B77, A700, PR99 and C270 as well as many Studer tape machines for 1/4 "tapes.
Anyone who has ever seen what damage green pressure rollers can cause understands why we have tried to own pressure rollers. Again, the highest quality was in the foreground. Thus, all the pressure rollers are round ground after vulcanization and the pressing in of the sintered bearing.
Anyone who has ever seen what damage green pressure rollers can cause understands why we have tried to own pressure rollers. Again, the highest quality was in the foreground. Thus, all the pressure rollers are round ground after vulcanization and the pressing in of the sintered bearing.
All pinch rollers are oiled for life of the pinch rollers.
Pinch roller A77
The pinch rollers of the Revox A77 have an axle length of 11 mm compared to the pinch rollers of the Revox B77 with 9 mm. Who wants to balance the difference with 2 metal discs here can completely do without the pressure roller. You can not break the synchronization more thoroughly!
Pinch roller B710
It was important to us that no polyurethane is used. We also only use sintered bronze bearings. Plastic bearings are no good, we had to find out ourselves.
Attention! The Revox B710 is available with 8.0 mm and 8.6 mm as well as with two 13 mm pressure rollers.
Pinch roller B710, B215
Also the pinch rollers with 13 mm consist of sintered bronze bearings and rubber. Also here after rounding is vulcanized. Only in this way can we guarantee a synchronization that is in the specified specifications of Revox!
The pinch rollers also fit with the Studer Cassette Decks A710 and A721
Accessories of the Pinch rollers
In addition to the high-quality pressure rollers, we offer suitable accessories such as:
- Copper discs suitable for Revox B77, PR99
- sliding discs suitable for Revox A77, B77 ...
- sliding discs suitable for Revox B710, B215 ...
- Shaft securing rings for the tapedecks
- Sintered bearing oil
Charging capacitors of the
High Grade Audio / Power Cap Series
- Made in Germany
- 105 ° C
- after ours
Specifications made
- manufactured according to IEC60384
22.000µF 80V
Charging and filtering capacitors for the amplifiers Revox A740, B740 and Studer A68.
These best quality capacitors are an excellent match for Revox and Studer power amplifiers.
Both the screw fastening and the screw connections fit 100%.
The nominal voltage has been increased from 63V to 80V and the capacity increased from 15.000μF to 22.000μF. The outer dimensions are unchanged.
10.000µF 63V
Charging and filtering capacitors for the devices Revox A722, B750, B780, C270 and Studer A807, B67 and so on.
Again, the capacitors fit mechanically (4 pin, dimension) as well as electrically to 100%.
22.000µF 63V
Charging and filtering capacitors for the devices Revox B150, B250, B285 and so on. These capacitors also fit mechanically (5 pin, dimension) as well as electrically 100%.
Wherever Studer and Revox have used 5-pin charge capacitors, you can use our capacitors.
2.200µF 40V axial
We can also manufacture axial ones. Special the axial design is nowhere in a sufficient quality. These capacitors are used among others in Revox, B77, PR99, B760, B750, B780, B790 and so on.
1.000µF 40V axial
The 1,000 μF or more recently are used 1.0 mF capacitors among others in Revox, A77, A76, A78, B790, B791, B795 and so on.
revox-online-shop
You receive these and even more high quality parts on our online-shop
Thomas Schröder
Schottjer Straße 30
26529 Upgant-Schott
Germany
Schottjer Straße 30
26529 Upgant-Schott
Germany
49 4934 - 80 44 39
info@revox-online.de